BOW Products 46” XT XTENDER Fence - T-Track Table Saw Fence System with Multiple T-Slots for Woodworking Accessories - Fits Portable, Cabinet, and Bandsaws - XT546 (Fence Only)

I bought this kit for my DeWALT DWE 7485 table saw. It is easy to install and easy to remove. I have already made 90 long rip cuts with this extender. I cut 2" x 6" x 8'. So the extender has already passed 270 feet of wood through itself. The feather boards really help to give the wood the right direction, not allowing it to go up and away from the rip fence.In my opinion, this kit is a little overpriced.But overall, it is a good thing, I liked it. Long rip cuts became easier and faster for me.

I use a DeWalt 10" jobsite table saw due to space limitations in my shop. But this fence, along with the XT featherboards and dovetail clamps, significantly improve the saw's capabilities. The #1 complaint about jobsite saws is the short runup to register against the fence. However, this can dramatically improve that. I have been able to work with much larger sheets on a small table saw.The fence is much taller than the DeWalt saw's built in fence, so a lot more techniques are possible, too.It's no panel saw, but it can expand the small shop to some pretty incredible levels, if the operator is smart.

I wanted to review the fence of Bow Products.I just bought the fence and 2 clamps.Fast Shipping, I supposed to get it on Saturday, I got it a day earlier, on Friday.The cardboard is super heavy and stiff. From the moment you take it into your hands, you see that the Bow Products Company did not cut any corners. Looks like they want to make sure that there is absolutely zero chance for any damage or bend of the fence in the shipping. Just the packaging itself is probably worth $10.The fence is heavy and solid 1 inch thick aluminum.Quality! You are going to see it right away.I have the 10 inch metabo hpt jobsite saw ($450). The saw is stationed in the basement of my house, I have all the space I need. I am using 8 foot long outfeed table and I am currently building 4 foot infeed table.Wait! You do need to buy this fence - you have the support tables. Wrong!I also have 12 inch single bevel meter saw and circular saw with the aluminum guide for longer cuts. I am not planning to spend hundreds of dollars for the track saw - I like using my table saw. I want to be able to cut entire sheet of plywood by myself on the table saw.Installation took 5 min. Position the fence accordingly and use the clamps.I did have a little problem with my original fence. The "low fence" or "flip support" part of my original fence for wider pieces (mostly plywood) was getting in the way of the clamps and if I wanted to cut something wide, I would have to take the Bow Fence off , flip the support, reattach Bow fence - too much hassle. I am lazy, I do not want to disconnect and then connect - the Bow Fence will stay in place on my saw! I permanently disconnected flip support and I cut wide piece of 3/4 plywood, which I can slide underneath from either side of the fence for support for wider pieces.The original fence is 23 inches long. The Bow Fence is 46, so I am doubling the "travel time" of the workpiece against the fence. I am using it mostly for infeed. (21 inches on the infeed and 2 on the outfeed).In the future, I might get some upgrades for my table saw like zero clearance insert, feather boards, etc. My argument is this: "This fence should be Number 1 upgrade for any small/compact/contractor/jobsite table saw". This upgrade should be done before any other upgrades are even considered.The way that I am using table saw is probably completely different that an average person.Because I am absolutely terrified of it, I like to stand far away from the saw. I use two long push sticks (each one is about 42 inches long), plus I stand at 6'1'', so I have a little longer reach. This fence fits the bill perfectly for "far away" and accurate work.This is one of those GENIUS ideas ("FENCE IN YOUR FACE") that ALMOST no one thought about it. Get it, you will absolutely love it!

A must have for contractor table saws. This turned my dewalt 7491 into a much safer and more capable table saw. I combined this with the bow feather boards so there’s no way kickback is sending anything my direction. I’m very happy with how easy it was to attach this to the existing fence and glad for the added support and safety. This makes milling rough cut boards safe and simple (after I’ve jointed and planed them).

With this and the feather boards (sold separately), I now feal safer using my table saw by myself. For years I had a helper on the receiving end. Between health issues and losing my help, I researched on how to use the saw safer and this was the route I found. Made well and has clamped to my Delta 36-725 T2 without any issues

Excellent quality. Would be a five star review if the price was less.

The whole fence system just works. With stock guides attached making accurate cuts is way easier. Real potential unlocked through additional accessories.

This gives the wood I'm cutting really good control and stability. Definitely buy it with the outfeed supports and feather boards. I have a DeWalt job site saw, and it takes it to the next level.